Open Source Hardware Logo

The official Open Source Hardware logo is finally out. Just in time for our new batch of boards. We just hope this prints okay on the boards. 🙂 Read more

Current Consumption

At first, we thought of putting the current consumption measurement process of Mini Ultra MHz in one post. However, the post seems to be too long to be fitted into one post. So, here is the 1st part of the current measurement process. Read more

We have just updated with products from Sparkfun Electronics. Do drop by our website to check them out! If you have an item from Sparkfun Electronics that we have yet to carry, drop us an email and we’ll try our best to make it happen on the next shipment. Read more

Our webshop will be down for a while for maintenance.

We’ll be right back!

The webshop is back and running! Sorry for the inconvenience.

Some of you might have came across our earlier design on low power Arduino compatible board going under the name Ultra. We are making a tiny version of the Ultra design – Mini Ultra 8 MHz. Mini Ultra 8 MHz is a simplified and stripped down version of Ultra. Using this board under the Arduino IDE, you can select the board as “Arduino Pro or Pro Mini (3.3 V 8 MHz) w/ ATmega328”. As the name suggest, Mini Ultra 8 MHz is designed to be low power (less than 5 µA in power down mode). Read more