Forum Replies Created
-
AuthorPosts
-
mdelain
Participantby the way, with pin 4 set to HIGH, what are the risks to short the pin with the RN RST button?
mdelain
ParticipantI tried using your sketch and adding additional power, but I got the same behaviour: no discovery after several tries in the java utility, even with resetting the RN.
I tried also with a serial tool, at all speeds available: sometimes I get jibberish in return, sometimes nothing. It seems to be still alive but a little bit crazy 😉mdelain
ParticipantHi,
My mistake, I didn’t sneak enough on GitHub when I looked at the schematics.
I suspected that the soft serial lib could have issues with high bitrate, but I was somehow puzzled on how to achieve an auto-bitrate when reading the Microchip specs o)I will try using your script tonight + provide extra power, but I’m quite pessimistic: I had no issue talking directly with the RN2483 using the serial tool (+ switch in “RN” position) but I couldn’t get any data out of the RN after this silly FW update attempt. This is why I think this is beyond the buggy java interface. I also tried to reset the RN while the tool was probing the serial port, without success.
I’ll let you know
thanks for your help! 😉-
This reply was modified 8 years, 2 months ago by
mdelain.
-
This reply was modified 8 years, 2 months ago by
-
AuthorPosts



