Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 17, 2018 at 12:03 PM in reply to: 6.4V Lithium iron phosphate battery #7916
    info6
    Participant

    Hi Lim,

    Is there anyway to disable the green LED when the battery is connected in software?

    Brett

    February 14, 2018 at 10:41 PM in reply to: 6.4V Lithium iron phosphate battery #7897
    info6
    Participant

    Well if you need a beta tester I would be happy to help out 😉

    February 12, 2018 at 9:01 PM in reply to: 6.4V Lithium iron phosphate battery #7887
    info6
    Participant

    For my application even under 10mA is ok for now.

    Would be very interested in a LiFePO4 version but also if you are already looking into it LTO support (though there aren’t any chipsets I can find for it yet) would be even better. The cold performance and charge cycling ability of those batteries is super amazing.

    Brett

    February 12, 2018 at 10:27 AM in reply to: 6.4V Lithium iron phosphate battery #7883
    info6
    Participant

    Ah bummer. What sort of current draw can I expect?

    My project is based on the code in this post: http://www.rocketscream.com/blog/docs-item/using-rtc-in-low-power-mode-on-mini-ultra-pro/ I would test it myself but I don’t have a multi-meter at the moment that can do micro or milli amp testing.

    What advice do you have for minimizing power consumption when using the Vin? I need to use different batteries to deal with cold temps.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)