Using the RST pin

You are here: / / / / / Using the RST pin
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 15, 2021 at 4:49 AM #15995
    Christophe Labouisse
    Participant

    There’s RST pin on the Mini Ultra PRO v3 however it is not really clear how to use it. Should it be put to 0 or 3.3v?

    May 18, 2021 at 7:13 PM #16146
    LIM PHANG MOH
    Keymaster

    That is reset the MCU. It has an external pull-up that keep it at 3.3V.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.