Reflow Oven Builds

[LIM PHANG MOH]

Over the years, we received many emails of customer’s reflow oven builds. These builds are just too awesome to be kept to ourselves. By posting your setup image, we hope it could inspire others to build their own reflow oven and start reflowing SMD PCB!

[LIM PHANG MOH]

Reflow Oven Build by Harris.

Uses the Tiny Reflow Controller.

• This reply was modified 11 months, 1 week ago by LIM PHANG MOH.
• This reply was modified 11 months, 1 week ago by LIM PHANG MOH.
• This reply was modified 9 months, 2 weeks ago by LIM PHANG MOH.

[LIM PHANG MOH]

Reflow Oven Build by Keith. Excellent and detailed wiring diagram by Keith!

Uses the Tiny Reflow Controller.
Note: The oven’s original temperature controller and timer have been removed and the heating elements wired directly across the incoming Active and Neutral. The elements were already series connected as two pairs, top and bottom.

• This reply was modified 9 months, 2 weeks ago by LIM PHANG MOH.
• This reply was modified 9 months, 2 weeks ago by LIM PHANG MOH.

[LIM PHANG MOH]

Reflow Oven Build by Yuriy. 3D print files available here!

Uses the Tiny Reflow Controller.

• This reply was modified 9 months, 2 weeks ago by LIM PHANG MOH.

[LIM PHANG MOH]

Reflow Oven Build by NickInTimeFilms.

Uses the Tiny Reflow Controller.

[LIM PHANG MOH]

Reflow Oven Build by Tom Jenkins. 3D printed casing was printed on a CR-10 3D printed with a 0.2 layer height using PETG. 3D print files for the casing available here!

Uses the Tiny Reflow Controller V2.
Parts and components used:

• Toaster oven
• Insulation sheets
• Heat Reflective Tape
• SSR

[LIM PHANG MOH]

Reflow Oven Build by Antonio.

Uses the Tiny Reflow Controller V2.

[Author]

Posts