Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Is the controller capable of driving a 16 X 2 LCD (1602A) and small voltage displays connected to the control terminals of the SSR and the thermocouple terminals? Thank you.
Yes, you can replace it with a 16×2 as long as it is the 3.3V version.
small voltage displays connected to the control terminals of the SSR and the thermocouple terminals?
You can’t on the thermocouple terminals as they only few mV range. For the SSR terminal, as long as the small voltage display is not using it as power supply.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
